Dryer fires have forced many homeowners to call the fire department. Still, no fireman would say that all dryers represent a safety hazard. A dryer is like a fire in a fireplace; it does not represent a hazard as long as it receives the proper amount of attention.
The first example of adequate attention
That first example ought to become evident on the day of the dryer’s installation. The appliance should be installed by a professional. Someone that has gained expertise in the installation of dryers knows how to limit the number of bends in the vent pipe. Fewer bends means fewer spots where lint can collect. All dryers are electrical appliances. An electric outlet or wire could act as a fire starter. That possibility ought to be prevented during the installation process.
Subsequent and direct attention
Keep flammables out of the space affected by the dryer’s warm temperatures. Do not let dust collect on the floor near the appliance. Most of the appliance repair experts in Cambridge advice about cleaning the lint filter before and after drying each load.
Be sure to use the proper type of venting material. Vents made of plastic or aluminum foil can act as possible fire-starters. Only rigid and flexible materials exhibit the features that have come to be associated with vent-ready materials. A rigid material cannot be used to make an accordion style vent, the sort of structure which demonstrates the ability to collect lots of lint.
Do not let a vent get clogged. The sort of thing that could clog that hot air passageway would most likely be something flammable. That flammable substance would then get repeatedly exposed to very hot temperatures. That repeated exposure could increase the likelihood for ignition of a fire.
Do not overload the dryer. Admittedly, that particular action may not seem like something that could start a fire. After all, it involves throwing an extra-large amount of wet fabric through a dryer’s open window.
Wet fabric does not burn. Yet that load could force the dryer’s user to run the appliance for an extra-long period of time. That would allow any trapped lint to have added exposure to the dangerously hot temperatures.
Even indirect attention works to prevent unwanted fires
The person that has agreed to hook up a home’s dryer needs to pay close attention to the literature that was created by the manufacturer. That same piece of literature ought to contain information on the electrical plug and outlet that has been recommended by the manufacturer. Later, if the plug did not match with the outlet and with the dryer’s electrical components, then it could actually trigger an unexpected fire.