What Happens When The Dishwasher Doesn’t Start?

There are a few different things which might go wrong with your dishwasher. It could produce certain bad odors or it might fail to get the dishes properly cleaned. However, one of the problems which would require special attention is when the machine stops working altogether – when you can get it to start. This is a very unfortunate situation to be in and it’s definitely quite burdensome. However, instead of calling the technicians right away, maybe there is something you can do about it. Below you will find a few helpful tips and potential solutions for this kind of issue.

1. Check your power supply

Now, the dishwasher is supposed to have a nearby shutoff – it could be a switch right above your sink or a plain cord that you can unplug beneath it. If you have accidentally turned the switch off- switch it back on. Or, maybe the machine is just unplugged – you’d be surprised how often that’s the issue. If it doesn’t start, you might want to check out the circuit and see if there is electric flow to it. Using a multi meter should suffice.

2. Spin the motor

This is another possible solution in case the motor has stuck and it won’t turn. This is also a very common issue, especially if you have used the dishwasher for a long time without any maintenance. One of the tale signs for this particular issue is if you hear a constant and humming sound without any further action. In order to get things in order, you would need to start by removing the lower panels of the dishwasher. Reach under them in order to spin the motor. You can do so by turning the fan blades with your hands – it’s not particularly hard. However, make sure that you have turned off the power from the main panel before you proceed with this step. Always keep in mind that the safety should be your first and most important priority.

If the blades spin but the dishwasher doesn’t start as soon as you turn on the power, you are likely to be facing a far more serious issue – probably there is a bad switch or your pump is clogged. All of these are problems that you won’t be able to handle on your own. It’s highly advisable that you call a professional to help you out in situations of the kind.

The tools that you are going to need for the aforementioned operations include slip joint pliers, rags, needle-nose pliers, knee pads, a bucket and 4-in-1 screwdriver. In any case, the fixes shouldn’t take you more than a few minutes each as they are nothing complex. However, if you think you won’t be able to do it, it is best to ensure that the professional appliance repair company is called in.